90 search results for splicing

Class II Tips for Stripping the Cover

Class II Stripping Cover SAMSON SPLICING INSTR UCTIONS Extract core Class II core-dependent, +1.360.384.4669 Double Braid Class II Stripping Cover SAMSON SPLICING INSTR UCTIONS rEMOVing cOVEr Marking, . This will be Mark A. Insert a splicing fd with the cover into the core as close to the lock stitch, Procedure Whipping Method i SaMSOn SPLicing inSTr UcTiOnS STEp 1 Form loop along the rope with whipping, Seizing Method ii SaMSOn SPLicing inSTr UcTiOnS STEp 1 Attach twine to netting needle. STEp 4

https://www.samsonrope.com/docs/default-source/splice-instructions/dblbrd_c2_stripping_cover_web.pdf?sfvrsn=f3566b8d_4

12-Strand Class II Inboard Eye Splice for K-100

Class II Inboard Eye Splice For K-100™ SAMSON SPLICING INSTR UCTIONS 1 s t e p Tape the bitter, Splice For K-100™ SAMSON SPLICING INSTR UCTIONS 4 s t e p 5 s t e p The twine should now, +1.360.384.4669 12-Strand Class II Inboard Eye Splice For K-100™ SAMSON SPLICING INSTR UCTIONS At Mark 2, open, Inboard Eye Splice For K-100™ SAMSON SPLICING INSTR UCTIONS Enter the body of the rope at the closest, CustServ@SamsonRope.com | Tel +1.360.384.4669 12-strand Class ii inboard eye splice For K-100™ samson sPLiCing insTr

https://www.samsonrope.com/docs/default-source/splice-instructions/proprietary_k-100_inboard_eye_splice_web.pdf?sfvrsn=149686c4_4

Selecting The Right Line for your Boat - Samson Rope

®, or Vectran® are categorized as Class II. Splicing techniques: Why is knowing the class of my line important? Splicing techniques are different between Class I and Class II ropes and reflect the differences, , and recommended splicing technique. Dock & Anchor Lines On most boats, the most frequently used lines aboard

https://www.samsonrope.com/resources/recreational-marine/selecting-the-right-line

Double Braid Class II Eye Splice for TS-II

Class II Eye Splice for TS-II™/ TS-II Premium™ SAMSON SPLICING INSTR UCTIONS For all measurements, +1.360.384.4669 Double Braid Class II Eye Splice for TS-II™/ TS-II Premium™ SAMSON SPLICING INSTR, ™ SAMSON SPLICING INSTR UCTIONS From Mark 2 on cover, count 8 picks (pairs of right and left laid, +1.360.384.4669 Double Braid Class II Eye Splice for TS-II™/ TS-II Premium™ SAMSON SPLICING INSTR UCTIONS 6 S, Note: When splicing thimble eye, slide thimble in place between Marks 2 and 3 before attaching

https://www.samsonrope.com/docs/default-source/splice-instructions/dblbrd_c2_eye_splice_ts-ii_web.pdf?sfvrsn=d6640e6a_4

QUIK-SPLICE - Samson Rope

QUIK-SPLICETM All Products Print Page QUIK-SPLICETM In this fast splicing, 12-strand single braid construction, high-strength Ultra Blue fiber creates a rope that is 30-35% higher in strength than the equivalent polypropylene construction, giving Quik-Splice up to three times more wear life than polypropylene. Product Code, Know What You Need? Buy Now polyolefin, 12-strand In this fast splicing

https://www.samsonrope.com/commercial-fishing/quik-splice

12-Strand Class II Outboard Eye Splice for K-100

 PAGE 1 OF 4 SamsonRope.com | Email CustServ@SamsonRope.com | Tel +1.360.384.4669 12-Strand Class II Outboard Eye Splice For K-100™ SAMSON SPLICING INSTR UCTIONS Class II ropes are made, Outboard Eye Splice For K-100™ SAMSON SPLICING INSTR UCTIONS Mark 2 4 s t e p 4A 4B 4c Mark 3, +1.360.384.4669 12-Strand Class II Outboard Eye Splice For K-100™ SAMSON SPLICING INSTR UCTIONS 5B 5c, class ii outboard eye splice for k-100™ saMson splicing instr uctions DOCUMENT

https://www.samsonrope.com/docs/default-source/splice-instructions/proprietary_k-100_outboard_eye_splice_web.pdf?sfvrsn=38a2d79e_4

Double Braid Class II Eye Splice

 PAGE 1 OF 3 SamsonRope.com | Email CustServ@SamsonRope.com | Tel +1.360.384.4669 Double Braid Class II Eye Splice SAMSON SPLICING INSTR UCTIONS Class II (core-dependent) double braids are made, , as done with Mark 1. When splicing on a thimble with ears, slide thimble on and position between Mark 1, Eye Splice SAMSON SPLICING INSTR UCTIONS 3 STEP INSERTING CORE INTO CORE 2A Now extract core, and Seizing Method II SAMSON SPLICING INSTR UCTIONS Seizing Method II STEP 1 Attach twine to netting

https://www.samsonrope.com/docs/default-source/splice-instructions/dblbrd_c2_eye_splice_web.pdf?sfvrsn=2baf982e_6

PTS-3 NYLON - Samson Rope

PTS-3 NYLONTM All Products Print Page PTS-3 NYLONTM PTS-3 Nylon is a premium, 3-strand rope that is heat set by our exclusive thermo-set process. This process coats the rope with our Samthane coating and sets the fibers, bonding them to create working firmness and extend wear life. The result is less than 1% shrinkage, excellent energy absorption, improved splicing, and a long wear life. Product Code 188

https://www.samsonrope.com/commercial-fishing/pts-3-nylon

PTS-12 NYLON - Samson Rope

PTS-12 NYLONTM All Products Print Page PTS-12 NYLONTM PTS-12 Nylon is a 12-strand coated, heat-set stabilized nylon trawl twine. This line offers excellent strength, shock mitigation, and is extremely wear resistant. PTS-12 has 1% shrinkage, excellent energy absorption, improved splicing, and a long wear life. Product Code 820 Specific Gravity 1.14 Fiber (Core/cover) Nylon Splice 12-Strand

https://www.samsonrope.com/commercial-fishing/pts-12-nylon

TS-II PREMIUM - Samson Rope

TS-II PREMIUMTM All Products Print Page TS-II PREMIUMTM TS-II Premium has an HMPE core strength member encased in an HMPE fiber jacket. The jacket is further enhanced with Samthane coating, allowing for specific rope identification within the trawl net system. This firm, abrasion resistant line has excellent wear characteristics and works well on winch drums. Applicable splicing instructions are available upon request

https://www.samsonrope.com/commercial-fishing/ts-ii-premium

TS-II - Samson Rope

TS-IITM All Products Print Page TS-IITM TS-II is a core-dependent double braid with an HMPE braided core with a polyester cover that has the firmness required for trawl-system applications. The polyester jacket protects the strength member from abrasion. The Samthane coating applied to the cover further enhances abrasion resistance and allows for specific rope identification within the trawl net system. TS-II requires specific splicing

https://www.samsonrope.com/commercial-fishing/ts-ii

Training & Certification - Samson Rope

TRAINING AND CERTIFICATIONS Samson has developed training and competency management programs designed to share our expertise. Ultimately, a competent team will facilitate safe use and maintenance of rope products, thus decreasing risk during operation. Both onsite and online training programs with courses ranging from rope splicing techniques, proper installation procedures, and safe line handling and use are available

https://www.samsonrope.com/services/training-certification

Double Braid Class I Back Splice

 PAGE 1 OF 2 SamsonRope.com | Email CustServ@SamsonRope.com | Tel +1.360.384.4669 Double Braid Class I Back Splice SAMSON SPLICING INSTR UCTIONS Class I Double Braids are made from any or all of the following fbers: olefn, polyester, or nylon. The Samson Back Splice is a neat and permanent way to terminate the end of a line. It is fexible and can be tapered to reduce bulk. To make, CustServ@SamsonRope.com | Tel +1.360.384.4669 Double Braid Class I Back Splice SAMSON SPLICING

https://www.samsonrope.com/docs/default-source/splice-instructions/dblbrd_c1_back_splice_web.pdf?sfvrsn=9a1093fb_4

Winch Safety and Efficiency in Mining PDF

Reduced labor costs n Increased winching capability n Easy inspection and feld splicing n Easy eye re-splicing n Similar elastic elongation to wire rope n Reduced exclusion zones due to torque free

https://www.samsonrope.com/docs/default-source/technical-bulletins/winching_sell_sheet_web.pdf?sfvrsn=c1b8587a_6

Tenex Inspection and Retirement Guide

-splicing is not possible, retire the rope. Cut Strand REPAIR OR RETIRE WHAT > Fused fibers, . If re-splicing is not possible, retire the rope. Melted or Glazed Fiber R E PA I R WHAT > Visible

https://www.samsonrope.com/docs/default-source/technical-bulletins/tenex-guide.pdf?sfvrsn=df425e80_11

12-Strand Class I Eye Splice

INTO STANDING PART OF LINE 12-Strand Class I Eye Splice S AMSON SPLICING INST RU C T IONS Class I, Procedure S AMSON SPLICING INST RU C T IONS STEP 3 Continue to reinsert as shown until you have

https://www.samsonrope.com/docs/default-source/splice-instructions/12strand_c1_eye_splice_web.pdf?sfvrsn=b2d98cae_8

Double Braid Class II End-for-End Splice

 PAGE 1 OF 2 SamsonRope.com | Email CustServ@SamsonRope.com | Tel +1.360.384.4669 Double Braid Class II End-For-End Splice SAMSON SPLICING INSTR UCTIONS Class II double braid ropes are made in whole or part from any of the following high modulus fbers: Dyneema® , Vectran® , Technora® , or Zylon® . measuring and marking 1 s t e p 2 step knOTTing and POsiTiOning Measure back 6 fd, Double Braid Class II End-For-End Splice SAMSON SPLICING INSTR UCTIONS TaPering cOre TaiLs TighTening

https://www.samsonrope.com/docs/default-source/splice-instructions/dblbrd_c2_end_for_end_web.pdf?sfvrsn=210f47d0_4

Case Study: Stybarrow Venture Winch Line

> Case studies > Splicing instructions In addition to the buoy pull-in lines, the Stybarrow Venture

https://www.samsonrope.com/docs/default-source/case-studies/cs_stybarrow_venture_winch_swos_dec2015_web.pdf?sfvrsn=e72cbe0e_4

3-Strand Class I Eye Splice

 © 2012 Samson Rope Technologies, Inc. All rights reserved. S/WD #108294 7/2012 DOCUMENT 3Strand_C1_Eye Splice_JUL2012.pdf PAGE 1 OF 1 SamsonRope.com | Email CustServ@SamsonRope.com | Tel +1.360.384.4669 3-Strand Class I Eye Splice SAMSON SPLICING INSTR UCTIONS 2 step 1 s t e p Note the mark around the standing part of the rope that touches all 3 strands. Your individual taped strands will tuck under these marks. Tuck the middle strand (Strand 1) under the nearest marked pick

https://www.samsonrope.com/docs/default-source/splice-instructions/3strand_c1_eye-splice_jul2012_web.pdf?sfvrsn=a4c5dd24_4

3-Strand Class 1 Eye Splice

 SAMSON SPLICING INSTRUCTIONS 3 - Strand Class I Eye Splice Class I ropes are made from any or all of the following fibers: olefin, polyester, or nylon. The eye splice is used to place a permanent loop in the end of a rope, generally for attachment purposes to a fixed point. An eye is also used to form the rope around a thimble, which is used to protect the rope, especially when it is to be attached to a shackle, chain, or wire rope. A Although the 3-strand splice is the most common

https://www.samsonrope.com/docs/default-source/splice-instructions/3strand_eye_cls1.pdf?sfvrsn=1719586a_4
20 of 90 results